Qalabka iyo dhammaystirka qaybaha birta xaashida ah iyo qaybaha mashiinka CNC

Sharaxaad kooban:

Wax-soo-saarka Gaarka ah:

Faahfaahinta Badeecada

Calaamadaha Alaabta

HY metals waa alaab-qeybiyahaaga ugu fiican ee qaybaha birta xaashida ah iyo qaybaha mishiinka ee gaarka loo leeyahay oo leh in ka badan 10 sano oo waayo-aragnimo ah iyo shahaadada ISO9001:2015. Waxaan leenahay 6 warshadood oo si buuxda u qalabaysan oo ay ku jiraan 4 dukaan oo bir xaashi ah iyo 2 dukaan oo mishiinka CNC ah.

Waxaan bixinaa xalal xirfadeed oo loogu talagalay soo saarista biraha iyo balaastikada.

HY Metals waa shirkad kooxaysan oo bixisa adeeg hal-joojin ah laga bilaabo alaabta ceeriin ilaa alaabada la isticmaalo.

Waxaan qaban karnaa dhammaan noocyada agabka oo ay ku jiraan Birta Kaarboon, Bir aan miridh lahayn, Birta Qalabka, Naxaasta, Aluminium, iyo dhammaan noocyada balaastikada la farsamayn karo.

Qalabka iyo Dhammaadka Qaybaha Birta ee Sheet

Kala soocid adag, agabka birta xaashida ah waxaa inta badan ka mid ahCBirta Arbon,Bir aan Daxal lahayn,Aluminium DaawahaiyoDaawaha Naxaasta4 qaybood oo waaweyn.

Iyo dhammaato bir ah oo sheet ah ayaa inta badan ka mid ahCadayashada,Nadiifinta,Electroplating,Dahaarka budada,RinjiyeyntaiyoAnodizing.

Bir kaarboon ahwaa mid ka mid ah agabka ugu badan ee loo isticmaalo sameynta biraha xaashida ah. Aad ayuu uga xoog badan yahay Aluminium-ka waana ka raqiisan yahay birta aan miridhku lahayn.

Laakiin birta si cad ayay u fududahay in la miridhku ka soo baxo. Markaa dahaadh dahaadh ah ayaa lagama maarmaan u noqon doona qaybaha birta.

Qaybaha Birta Sheet ee laga sameeyay birta kaarboon oo leh dahaadhka Zinc

Dahaadhka Zinc, dahaadhka nikkel iyo dahaadhka chrome waxaa badanaa loo isticmaalaa qaybaha birta ee xaashida birta ah si looga hortago daxalka. Mararka qaarkood dahaadhka ayaa sidoo kale door qurxin ah ka ciyaara.

Bir aan miridh lahayn oo leh dhammaystir 2B ah, kaliya hayso dhammaystirka alaabta ceeriin ah.

Mararka qaar si aan u helno dusha sare ee qurxinta, waxaan ku samayn doonnaa dhammaystir cadayashada qaybaha birta ah ee aan daxalka lahayn.

Qaybaha Birta Sheet ee laga sameeyay birta kaarboon oo leh budada dahaarka leh Jaalle

Dahaarka budada waa nooc ka mid ah dahaarka resin epoxy, dhumucdiisuna had iyo jeer waxay u dhaxaysaa 0.2-0.6mm, taas oo aad uga dhumuc weyn lakabka dahaadhka.

Dhammaystirka Budada Coat waa ku habboon qaybo ka mid ah birta xaashida ah ee dibadda kuwaas oo aan u dulqaadanayn oo doonaya inay helaan midabyo gaar ah.

Sbir aan bir lahaynwaxay leedahay awood u adkeysi miridhku ka fiican yahay, oo si weyn loogu isticmaalo qalabka otomaatiga ah, qalabka caafimaadka, alaabta jikada iyo noocyo badan oo ah qalabka bannaanka, qolofka.

Bir aan miridh lahaynqaybaha badanaa uma baahna dhammaystir, kaliya ku hay alaabta ceeriin ah dhammaystir 2B ah ama dhammaystir Burushaysan.

Bir aan daxal lahayn oo leh saameyn dhammaystiran oo kala duwan

Adaawaha iftiinkawaxaa si weyn loogu isticmaalaa hawada sare iyo qolofka qalabka qaarkood si loo yareeyo miisaanka loona helo ilaalin miridhku ku fiican yahay.

Isla mar ahaantaana, aluminiumka aluminiumku wuxuu sidoo kale leeyahay awood midabayn oo aad u wanaagsan marka la isku daro.

Waxaad ka heli kartaa midab kasta oo qurux badan oo aad rabto qaybahaaga birta ah ee aluminiumka ah.

Cqaybaha birta sheet ustom oo leh dhammaystir kala duwan

Shaxda 1. Maaddada Caadiga ah iyo Dhammaadka qaybaha birta xaashida ah

Siyo qarxinta iyo dhammaystirka anodizing ee tuubooyinka aluminiumka ah ee la sii daayay.

Dhammaystirka ciidda ayaa dabooli kara cilladaha agabka ama calaamadaha qalabka ee qaybaha la farsameeyay. Anodizing waxay heli kartaa awoodda ka hortagga daxalka isla markaana waxay heli kartaa midabka ugu habboon qaybaha aluminiumka.

Markaa ciid-samaynta + anodizing waa ikhtiyaar dhammaystiran oo aad ugu habboon dhammaan qaybaha aluminiumka qurxinta leh.

Materiyals		Thickness	Dhammaad
Bir qabow oo la duubay	SPCC SGCC SECC SPTE Bir dahaaran oo bir ah	0.5-3.0mm	Dahaarka budada (Midab gaar ah ayaa la heli karaa) Rinjiyeynta qoyan (Midab gaar ah ayaa la heli karaa) Shaashad xariir ah Dahaadhka Zinc (Cad, Buluug, Jaalle) Dahaadhka nikkel-ka Dahaadhka Chrome-ka Dahaarka Elektarooniga ah, QPQ
Birta kulul ee la duubay	SPHC	3.0-6.5mm
Obir khafiif ah	Q235	0.5-12mm
Sbir aan bir lahayn	SS304, SS301, SS316	0.2-8mm	2B Dhammaystir walxaha ceeriin ah, Walax cayriin ah oo la cadayday Burush, Nadiifin Koronto-dhaliye Passivate
Sbirta pring Sqalab loogu talagalay biinanka guga	SS301-H,1/2S,1/4S,3/4S		Midna ma jiro
	Mn65		Daaweynta kulaylka
Analalka	AL5052-H32, AL5052-H0 AL5052-H36 AL6061 AL7075	0.5-6.5mm	Filim kiimiko oo cad Anodizing, Anodizing adag (Midab gaar ah ayaa la heli karaa) Dahaarka budada (Midab gaar ah ayaa la heli karaa) Rinjiyeynta qoyan (Midab gaar ah ayaa la heli karaa) Shaashad xariir ah Bacriminta ciidda Sandblast+ Anodize Dahaadhka Nikkel-ka Elektrola'aanta ah Burush, Boolish
Analalka	AL5052-H32, AL5052-H0 AL5052-H36 AL6061 AL7075	0.5-6.5mm
Brass	Si ballaaran ayaa loogu isticmaalaa Qaybaha elektarooniga ah, qaybaha isku xirka gudbiyaha	0.2-6.0mm	Dahaadhka qasacadda Dahaadhka nikkel-ka Dahaarka dahabka ah dhammaystirka alaabta ceeriin
Coper
Naxaasta Beryllium Naxaasta Fosfoorka
Daloolada lacagta ee nikkel	Shiilan elektaroonig ah	0.2-2.0mm	Walax ceeriin ah

Qalabka iyo Dhammaadka qaybaha mashiinka CNC

Qalabka caadiga ah ee loo isticmaalo qaybaha mashiinka CNC oo ay ku jiraan Bir, Bir aan miridh lahayn, Aluminium, Naxaas, iyo dhammaan noocyada walxaha balaastikada ah ee la farsamayn karo.

Qaybaha CNC badanaa waxay u baahnaayeen dulqaad adag, sidaa darteed lakabka dahaadhka looma oggola inuu aad u qaro weynaado.

Electroplating ee qaybaha birta iyo naxaasta, anodizing ee qaybaha aluminium waa dhammaystirka ugu caansan.

Cqaybaha mashiinka ustom CNC oo leh dhammaystiryo kala duwan

Siyo qarxinta iyo dhammaystirka anodizing ee tuubooyinka aluminiumka ah ee la sii daayay.

Siyo qarxinta iyo dhammaystirka anodizing ee tuubooyinka aluminiumka ah ee la sii daayay.

Markaa ciid-samaynta + anodizing waa ikhtiyaar dhammaystiran oo aad ugu habboon dhammaan qaybaha aluminiumka qurxinta leh.

Qaybaha naxaasta ah oo leh dhammaystir dahaadhka nikkel

Qaybaha dahaarka naxaasta ah, daaweynta dusha sare ee ugu badan ee loo isticmaalo waa dahaadhka tin iyo dahaadhka nikkel.

Shaxda 2. Agabka Caadiga ah iyo Dhammaadka qaybaha mashiinka CNC

Plast iyo Dhammaad	Mdaawaha etal		Finish
ABS	Adaawaha iftiinka	Al6061-T6,AL6061-T651	Burbur, Boolish, Burush
Nylon		AL6063-T6, AL6063-T651	Anodise, Aanodise adag
PC		AL7075	Ciid-qarax
POM(Delrin)		AL1060,AL1100	Saxanka nikkel ee aan korontada lahayn
Acetal		AL6082	Filim kiimiko ah oo kromate ah/chrome ah
PEEK	Sbir aan bir lahayn	SUS303,SUS304, SUS304L	Passivate
PPSU(Radel® R-5000)		SUS316, SUS316L	Sida loo farsameeyo mashiinka
PSU		17-7 PH, 18-8 PH	Sida loo farsameeyo mashiinka
PS	Tbir ah oo tayo leh	A2,#45, bir kale oo qalab lagu sameeyo	Daaweynta kulaylka
PEI(Ultem2300)	Mbir aan bir lahayn	Stkalluun12L14	Dahaadhka Nikkel/chrome
HDPE	Brass	Stkalluun12L14	Sida loo farsameeyo mashiinka
PTFE-ga(Teflon)	Coper	C36000	Dahaadhka Nikkel/Dahab/Tin
PMMA(Aqaylo leh)	Zoo ay ku jirto daawaha	C36000	Sida loo farsameeyo mashiinka
PVC	Titanium	6Al-4V	Sida loo farsameeyo mashiinka